It is possible that the working fluid in the fridge needs to be distributed and settled after transport. To do this, start the fridge and roll it 45 degrees to each side for 20-30 seconds. Then set it level, turn it off after a few minutes and let it sit for at least 30 minutes on a level surface.
Your fridge may also benefit from being reset to factory defaults:
Plug it in, and then hold the power button to turn it off. Now press the gear until E1 shows, then press&hold up/down together until -188 shows. Now press and hold power button until fridge restarts.
See this video on how to do this: https://bmc.worldmanager.com/go/WNPWs1
Please note that for testing purposes you should fill the fridge with something, such as bottle water, to ensure it has something in it to cool, otherwise the temperature reading on the display for an empty fridge may not be accurate, and the fridge may not behave as expected.
If you are still having issues & have performed a factory reset & are not seeing an error code:
Wholesale customers - please contact sales@electusdistribution.com.au for support.
Retail customers - please contact your local Jaycar or RTM store for further support.
Comments
0 comments
Article is closed for comments.